Special Metals & Engineering Profiles
Product search
Materials search

C95510


Aluminium Bronze -> C95510

 

 

 

General Characteristics 

Aluminum nickel bronze alloy that combines high strength, ductility and good abrasion resistance under severe loading conditions. Higher and more consistent mechanical properties – higher yield strength and ductility minimums on product over 1.0 in and typical mechanical property values of 20 - 30% above specification minimums. It has improved service life – enhanced corrosion resistance and fatigue life due to the alloy dispersion and refined, “wrought-like” microstructure. C95510 is commonly used in demanding aerospace applications, including bushings, spherical and rod end bearings, rub pads, and wear strips. This material is also used for applications in the oil and gas industry. 

 

 

Typical chemical composition 

Weight % 

Al 

Fe 

Mn 

Ni 

Sn 

Cu 

Zn 

Minimum 

9.70 

2.00 

-- 

4.50 

-- 

78.10 

-- 

Maximum 

10.90 

3.50 

1.5 

5.50 

0.20 

83.80 

0.30 

 

 

Physical properties

Characteristics

 

English

Metric

Nominal density (68°F/20°C)

 

0.272 lbs/in3

7.53 g/cm3

Melting range

 

1900°F-1930°F

1040°C-1050°C

Specific heat

70°F / 20°C

0.09 BTU/lb - °F

375 J/KG- °K

Coefficient of thermal expansion

Linear

68°F – 572°F

20°C – 300°C

9.00 micro in/in- °F

16.2 micro in/in- °K

Thermal Conductivity

68°F   /   20°C

24 BTU/ft- hr - °F

42 W/m - °K

Aluminium Bronze -> C95510 -> Bars & Tubes

Mechanical properties 

Wall thickness 

Tensile 

 

Ultimate 

Yield 

Elongation at break 

 

KSI 

MPa 

KSI 

MPa 

% 

0.25'' – 1.0''  

(6.35 – 25.4 mm) 

105 

724 

62.5 

431 

9 

1.0'' – 17.0'' 

(25.4 – 431.8 mm) 

95 

655 

50 

345 

8 

1.0'' – 4.0'' 

(25.4 – 101.6 mm) 

105 

724 

62.5 

431 

9 

4.0'' – 17.0'' 

(101.6 – 431.8 mm) 

95 

655 

56 

386 

9 

 

 

Specifications

·       AMS – 4880 

·       ASTM – B505, B271 

·       Military Standards – MIL-B-16033 

.

Legal Notice:   

All of the information presented here in the Bti-2xl © website is for pesonal and non-commertial usge.

Bti-2xl assumes no responsibility for accuracy of the presented information, which is supplied solely as a convenience to the end user.

The list of popular industry specifications is offered for general familiarization and cross reference purposes, thus should not be considered as a complete listing.

The information presented doesn't claim to replace proffesional consultation in metals selection or production. 

Contact us:                                                      

Phone:    +972-4-6182000

Fax:        +972-4-6182020

Mail:        info@bti-2xl.com 

PrintTell a friend
Jump to page content